|
 Files are in Adobe format.  46th Annual
Gun & Missile Systems Conference & Exhibition “Shaping Weapon Systems for Rapid Deployment: Development,
Interoperability & Flexible Response” Miami, FL 29 August – 1 September 2011 Monday, August 29, 2011 TUTORIAL B “Ready or not? Using Readiness Levels to
Reduce Risk on the Path to Production”, Mr. Dan Chien, Vice President,
Engineering, General Dynamics Armament and Technical Products Tuesday, August 30, 2011 DIVISION UPDATE/2012 JOINT ARMAMENTS
SYMPOSIUM Mr. Dave Broden,
NDIA Armaments Division Chair; Broden Resource Solutions KEYNOTE
ADDRESS: “Air and Missile
Defense Overview”, COL Cavalier, USA, Program Executive Officer, Missile
and Space, U.S. Army KEYNOTE ADDRESS: “Close Air Support and
Joint Operations”, Mr. Andrew K. Balding, Associate, Booz Allen Hamilton KEYNOTE ADDRESS: “The Role of the
Government Laboratory in Shaping Weapon Systems Development; An ARDEC
Perspective”, Mr. Anthony J.
Sebasto, Senior Associate for Munitions, U.S. Army ARDEC CONCURRENT
SESSIONS MONROE –
INDIRECT FIRES ·
11503 - An Analysis
of the Indirect Fires Portfolio of Munitions, Mr. Jim Rodrigue, Raytheon Land Combat ·
11830 -
Development of an Extended Range, Large Caliber, Modular Payload Projectile, Mr. Pierre-Antoine Rainville, GD-OTS,
Canada ·
11528 - XM1128
155mm Insensitive Munition (IM) High Explosive (HE) Extended Range Artillery
Projectile, Mr. Ductri Nguyen, U.S.
Army ARDEC ·
11511 -
Technologies Utilizing the M483 Carrier, Mr.
George Kurzik, GD-OTS, Red Lion – EMERGING TECHNOLOGIES: SYSTEMS ·
11586 -
Introduction of Wireless and MEMs based MDevices into Fire Control Systems, Mr. Ralph Tillinghast, U.S. Army
ARDEC ·
11641 -
Extended Area Protection and Survivability Program (EAPS), Mr. Manfredi Luciano, U.S. Army ARDEC ·
11720 -
Development of the Interceptor System for the Extended Area Protection &
Survivability (EAPS), Mr. E. Mitchell
Danielson, ATK, Plymouth – REQUIREMENTS & PROGRAM TRENDS ·
11786 - Naval
Forces Capabilities Gap Against Swarm Attacks, Mr. Andrew Bradick, Rheinmetall ·
11861 - U.S.
Forces Light and Medium Mortar Ammunition Insensitive Munitions Path, Mr. Nick Baldwin, U.S. Army RDECOM-ARDEC ·
11863 - IM
Compliance for Mortar Illumination Cartridges, Mr. Thomas Peter, U.S. Army RDECOM-ARDEC ·
11482 -
Precision Guided Indirect Munitions — Operational Evolution, Mr. Justin Skaret, Raytheon, Missile
Systems ·
11792 -
Enhancing Convoy Security by Means of Rapid Deployable Weapons, Mr. Gerrie Van der Merwe, BAE Land
Systems, South Africa TUTTLE – MODELING & SIMULATION I – DESIGN ·
11791 - Gun Launch
Dynamics Modeling—Benchmarking the State of the Art, Mr. Rollie Dohrn, ATK, Plymouth\ ·
11774 - Gun
Launch Dynamics and Aeroballistic Analysis via Onboard Laser Diode, Mr. Rollie Dohrn, ATK, Plymouth ·
GD-OTS/Nammo 25
mm JSF Combat Ammunition, Mr. Zack Kemp,
GD-OTS · 11824 - Design, Analysis and Weight Optimization Techniques for Joint Strike Fighter Missionized Gun Pod Support Equipment, Mr. Gary Miller, GD-ATP – MODELING & SIMULATION II: TEST
METHODS ·
11838 - A
Method for Assessing the Effects of Overpressure from Small/Medium Caliber
Weapons Fire, Mr. Steven Backer,
NSWC-Crane ·
11793 - The
Challenge of Environmental Testing of the Expeditionary Fighting Vehicle
Ammunition Feed System Separate from the Expeditionary Fighting Vehicle, Mr. Ron Hopkins, GDATP – TACTICAL ROCKETS & MISSILES ·
11808 - Design
Synthesis for Large Shaped Charges: From Requirements to Qualification, Mr. Jason Shire, Raytheon ·
11802 - Use of
COTS O-rings as a Pyrotechnic Safety Barrier in a Rocket Motor Ignition Safety
Device, Mr. Brian Erickson, ATK,
Plymouth ·
11756 -
Hellfire Integrated Blast Fragmentation Sleeve Multipurpose Warhead, Mr. Jonathan Thomas, GD-OTS Wednesday, August 31, 2011 AWARDS LUNCHEON 2011 Robert Trifiletti Award Winner Combat Archer CONCURRENT
SESSIONS MONROE –
ENERGETICS I ·
11822
- Novel ARDEC Igniters for Gun
Systems, Dr. Eugene Rozumov, U.S.
Army ARDEC ·
11787
- The Effects of Igniter Design on the Interior Ballistic Performance of
Deterrent Coated Propellants, Dr. Thelma
Manning, U.S. Army, RDECOM-ARDEC –
ENERGETICS II ·
11867
- IM in the Field—Experience of Reduced Sensitivity Mortar Cartridges to
Actual Combat Threat Stimuli, Ms.
Pamela Ferlazzo, U.S. Army RDECOM-ARDEC ·
11537
- Development and Manufacture of an Insensitive Composition B Replacement
Explosive IMX-104 for Mortar Applications, Mr.
Virgil Fung, BAE Systems Ordnance Systems Inc ·
11832
- Development and Characterization of IM Gun Propellant for the 120mm Tank
System, Mr. Duncan Park, U.S. Army
RDECOM-ARDEC ·
11821
- The Advance Case System (ACS) Program for 120mm Tank Training Ammo- Phase
2, Mr. Jeff Berg, ATK, Plymouth ·
11761
- High Explosives Charges for Insensitive Artillery and Mortar Ammunitions:
Performances, Technology, Producibility,
Affordability, Dr. Bernard Zeller,
SNPE – DIRECT
FIRES I ·
11747
- Direct Fires & Precision Weapons for Rapid Deployment at the Modern
Battlefield, Mr. Danny Schirding,
Israel Military Industries, Ltd. ·
11725
- Medium Calibre Goes in a New Direction, Mr.
David Leslie, BAE Systems Global Combat Systems ·
11572
- The Development and Testing of the Improved Kinetic Energy Electronic Time
(IKE-ET) Round, Mr. Geoffrey Bland,
NSWC Dahlgren ·
11809
- Composite Sabot Technology for the 105mm Rifled Tank Gun System, Mr. Velan Mudaliar, U.S. Army
RDECOM-ARDEC –
PRECISION WEAPONS ·
11719
- Common GPS: Development of the Subsystem Specification and ICD for the
Common GPS Subsystem for the Family of Precision Guided Projectiles, Dr. Karl Flueckiger, Draper
Laboratory ·
11635
- Very Affordable Precision Projectile (VAPP) System and Flight Experiments, Mr. Christopher Stout, U.S. Army ARDEC ·
11459
- Evolution of the EXCALIBUR Guided Projectile, Mr.
Chris Geswender, Raytheon Missile Systems ·
11526
- Precision Urban Mortar Attack (PUMA), Mr.
Luke Steelman, NSWC Dahlgren ·
11788
- Leveraging Proven Systems to Develop a Guided Mortar for APMI, Ms. Kelly Hanink, Program Manager,
Projectile Systems ATK Advanced Weapons Division, Plymouth TUTTLE – EMERGING
TECHNOLOGIES: MATERIALS & PROCESSES ·
11583
- New PVD Processes for Durable Pollution-Free Ordnance, Dr. Sabrina Lee, U.S. Army, ARDEC ·
12179
- The “Perfect” Time for an Upgrade to US Propellant, Mr. Donald Messner, ATK, Radford – MODELING
& SIMULATION III: SYSTEMS & MANUFACTURING ·
11648
- System Analysis with Integrated Modeling and Optimization, Mr. Philip Brislin, U.S. Army ARDEC
RDAR-MEM-L ·
11502
- A Virtual Learning Environment for Precision Indirect Fires, Mr. Jon Peoble, Raytheon ·
11779
- Next Generation Manufacturing & Modeling Technology, Mr. David Smith, U.S. Army Benet
Laboratories –
NON-TRADITIONAL WEAPONS I ·
11840
- Development of a Large Caliber Naval EM Railgun, Mr.
Roger Ellis, Office of Naval Research ·
11841
– Electromagnetic Railgun, a Multi-Mission Weapon System, Mr. Alan Kull, General Atomics ·
11828
- Scalable Gen-Set for Directed Energy Weapons: Resolving the Power
Problem, Mr. Bryan Bockmon, Rocky Mountain
Scientific Laboratory –
NON-TRADITIONAL WEAPONS II ·
11509
- Aggressor Suppression via the Use of Non-Lethal Projectiles and Launcher
Systems, Mr. Dan Hartman, GD-OTS ·
11697
- Netted Smart Precision Engagement Autonomous Rounds (NetSpears) for Navy
and Army Weapons, Mr. Allan Vanuga,
Raytheon Missile Systems ·
11781
- Gun-Launched Aerial Precision Munition, Mr. Jay Canela & Mr. Lloyd Khuc,
U.S. Army RDECOM-ARDEC ·
11525
- Cannon Cluster Munition Replacement for 155mm Artillery Systems, Mr. Ryan Gorman, U.S. Army ARDEC ·
11644
- Determination of the Shelf Life of MEMS Navigation- Grade Sensors through
Use of Accelerated Aging Principles, Mr.
James Sarruda, U.S. Army ARDEC
Thursday, September 1, 2011
CONCURRENT
SESSIONS MONROE – EMERGING
TECHNOLOGIES: AMMUNITION ·
11581
- Precision Air Dropped Guided Munition (PADGM) System, Mr. Asad Khan, U.S. Army ARDEC ·
11759
- Scalable Airburst Fuze Technology—Shaping the Future, Mr. Paul Reynolds, GD-OTS, Marion ·
11790
- LW25 Programmable Air Burst Munitions, Mr.
Donavan Gloude, ATK, Plymouth ·
PRODAS
GNC Trajectory System Simulation, Mr. Jeff
Siewert, ArrowTech – DIRECT
FIRES II ·
11611
- USMC EFV Program Cartridge Qualification and Integration Program Status,
Maj Ian McDuffie, USMC, PM AAA ·
11615
- 30mm MK317 TPDS-T Cartridge Development and Qualification, Mr. James McConkie, ND5, Office of the
Program Manager ·
11758
- 30mm x 173 Ammunition Suite—The Appropriate Response for Any Target, Mr. Rick Wright, GD-OTS ·
11800
- LW30 Target Practice-Traced (TP-T) Ammunition, Mr. Kyle Nerison, ATK, Plymouth ·
11819
- 30 x 173mm TPDS-T Development, Mr.
Donavan Gloude, ATK, Plymouth TUTTLE – PLATFORM
& WEAPON SYSTEM INTEGRATION ·
11681
- Next-Gen Fire Control: Free Software & Video Game Math, Mr. Marc Santoro, NSWC Dahlgren ·
11777
- Development of a Moveable Weapon Mount System for the CH47 Helicopter, Mr. Michael Colonnello, U.S. Army
ARDEC ·
11584
- Rapid Integration of the M197 onto the MH-60S, Mr. Joseph Burkart, NSWC Crane ·
11660
- Gun Weapon System (GWS) MK 48 for USCG Legends Class Cutters, Ms. Kaye Aswegan, NSWC Dahlgren – ARMAMENT
SUBSYSTEMS ·
11799
- Developing Reliable Software in a Rapid Deployment Product, Mr. Steve Gunderson, ATK, Plymouth ·
11823
- M197 Weapon Command and Control System for the MH-60S, Mr. William Reed, U.S. Navy ·
11804
- Pivoting Coupling—Army’s Greatest Invention, Mr. Steve Kotefski, Savit Corporation
Back to NDIA Conference Proceedings
BACK to the DTIC
Homepage 
|
|
||
