Accession Number : AD1012679


Title :   Initial Burn Pan (JMTF) Testing Results


Descriptive Note : Technical Report


Corporate Author : U.S. Coast Guard New London


Personal Author(s) : Hansen,Kurt A ; Balsley,Alex


Full Text : http://www.dtic.mil/dtic/tr/fulltext/u2/1012679.pdf


Report Date : 01 Mar 2016


Pagination or Media Count : 34


Abstract : The goal of this series of tests, described in this report, was to re-establish the in-situ burn (ISB) capabilities at the Joint Maritime Test Facility (JMTF) with the intent to provide a test bed for future research and equipment development. The capability was originally established in 1998 to develop an American Society of Testing and Materials (ASTM) standard for fire-resistant boom. It had not been used for over 15 years and was almost completely destroyed when hurricane Katrina made landfall in August 2005. To achieve the goal to restore the facility, the USCG Research and Development Center (RDC), the Bureau of Safety and Environmental Enforcement (BSEE), and the US Naval Research Laboratory (NRL) assembled a team with the needed diverse experience covering full scale fire testing, in-situ burning and the spectrum of navigational aspects of performing these burns/functions at sea. The burn pan was refurbished by repairing, re-leveling, plugging potential leaks and painting. A system to deliver fuel to the pan for testing was developed and installed. Sensors and video cameras connected to a data collection system were also installed and a test plan based on the ASTM standard was developed. Three burns increasing in size were conducted lasting about 10 minutes, 35 minutes and 60 minutes respectively. Data was recorded using video, still cameras, thermocouples and air monitoring sensors. Support was supplied by the Gulf Strike Team (GST) and other partners including Sector Mobile, Station Dauphin Island and the Alabama Port Authority. The burns were completed without any problems or mishaps. The information collected will be used to complete the refurbishment and develop test plans and operating procedures for future use of the facility to meet USCG and BSEE objectives.


Descriptors :   test facilities , test equipment , burns , combustion , OIL SPILLS , fires


Distribution Statement : APPROVED FOR PUBLIC RELEASE