Accession Number : AD0631153


Title :   THE NOTCH-BEND STRENGTH OF NONFERROUS ALLOYS IN HEAVY SECTIONS.


Descriptive Note : Research and development phase rept.,


Corporate Author : NAVY MARINE ENGINEERING LAB ANNAPOLIS MD


Personal Author(s) : Chu,H. P. ; Skalican,A. J.


Report Date : MAR 1966


Pagination or Media Count : 19


Abstract : The notch-bend strength of ten nonferrous alloys was determined. Four-inch-square specimens of seven cast copper-base alloys and a cast nickel-copper alloy showed extensive yielding prior to fracture. Similar specimens of wrought 7075-T6 and extruded 2024-T4 aluminum alloys failed in a brittle manner. It is concluded that the seven cast copper-base alloys and the cast nickel-copper alloy are notch tough and thus not prone to brittle fracture in air when used in sections up through 4 inches thick. (Author)


Descriptors :   (*ALLOYS, NOTCH TOUGHNESS), (*COPPER, NOTCH TOUGHNESS), (*NICKEL ALLOYS, NOTCH), (*ALUMINUM ALLOYS, NOTCH TOUGHNESS), BENDING, YIELD POINT, FRACTURE(MECHANICS), BRITTLENESS, FAILURE(MECHANICS)


Subject Categories : METALLURGY AND METALLOGRAPHY
      MECHANICS


Distribution Statement : APPROVED FOR PUBLIC RELEASE